TURNIGY A6 10 FREE

(if you hear beeps, check your battery connections)

select program: 'charge', 'discharge'.

set time limit 'Tlim:' (can be unlimited).

set battery voltage (number of cells) 'V:'.

TURNIGY A6 10 FREE

select a free battery slot (indicated as 1., 2.).Reset the charger to default settings (go to: 'options'->'reset default' and press the 'start' button)ДЄnd then calibrate it, now your charger is ready to use. any charger listed above with an unknown CPU (CPU not labeled)ДЄfter flashing your charger the first thing you should do is.Imax B6 Mini 1-6 60W Balancer/Charger - Same reason as above.Turnigy Accucel-6 80W Balancer/Charger - Based on an older, uncommon CPU.Turnigy MEGA 400Wx2 Battery Charger/Discharger (800W).Turnigy Accucel-8 150W 7A Balancer/Charger.Turnigy Accucel-6 50W 5A Balancer/Charger w/ Accessories.Turnigy A-6-10 200W Balance charger & discharger.AC/DC Dual Power B6AC 80W RC Balance Charger/Discharger.Only chargers with a atmega32 or M0517LBN CPU are supported. WARNING: You can get two chargers with the same name but different CPUs even if you buy from the same seller. Overcharge and overdischarge monitoringДЄLWAYS connect the power supply first, then the battery!ДЄLWAYS disconnect the battery before disconnecting the power supply! Hardware.Internal and external temperature monitoring.terminates charging when the current lowers to 20% of Ic.terminates charging when the current lowers to 10% of Ic (by default, adjustable in battery settings).Now what are you waiting for.This project is an alternative firmware for a variety of lipo chargers, That ^ battery charged for 1 minute and 11 seonds and charged 17mah and charged up to 8.40 voltsДЄll in all I would say that if you have more than one battery, you need to get this charger! It is a bargain for what it does and there isn't really anything that it can't do! The charger alerts you with a pretty tone when the battery is finished and it tells you how many MAH it charged, how long it was charging for, and how many Volts the battery was charged to.

The charge stayed cool throughout the whole time it was charging all four batteries and held the charge rate consistent the entire time! The most I've done to it at once is to charge two 8000mah 2s lipos a 6A charge rate, a 4000mah 3s lipo a 6A charge rate, and a 3250mah 3s lipo a 6A charge rate - each battery was charged in a different port at the same time. Ok, so I know that you are wondering what the biggest load I've put on it was. It has many useful features such as a Cycle feature that can cycle a battery up to 5 times on it's own - I brought a 6 cell NIMH battery that had been dead for over a month back to life! It also has a discharging feature, and even a storage mode feature for Lipos! Once you start charging the battery, it holds the charge rate very consistently throughout the whole charge time. It does everything you would ever need and it costs less than some chargers that can't even do as much as one of the ports on this charger an do! Although it does not come with a manual, it is very easy to navigate through the menu. Individual Screen screens for each port

1 Set of Alligator clips for the charger to power supply leads - easily removable 1 Bare end plug so you can solder on your own plug This review has been awaited by many, and I figured that I'd put a little time into it and finally review it.

Turnigy a6 10